Items where Subject is "Engineering"

Article

Abebaw, Gashaw and Bewket, Bahiru and Getahun, Shumet and Lee, Bang Yeon (2021) Experimental Investigation on Effect of Partial Replacement of Cement with Bamboo Leaf Ash on Concrete Property. Advances in Civil Engineering, 2021. pp. 1-9. ISSN 1687-8086

Abulgasem, Suhila and Tubbal, Faisel and Raad, Raad and Theoharis, Panagiotis Ioannis and Liu, Sining and Ali Khan, Muhammad Usman (2020) A Wideband Metal-Only Patch Antenna for CubeSat. Electronics, 10 (1). p. 50. ISSN 2079-9292

Adegbite, S. A. and Asiru, W. B. and Salami, M. O. and Nwaeche, C. F. and Ebun, K. K. and Ogunbiyi, A. A. (2019) Design and Development of Power Driven Gari Fryer. Journal of Engineering Research and Reports, 4 (2). pp. 1-15. ISSN 2582-2926

Akinola, Oluwaseun Ibrahim (2024) Adaptive Location-based Routing Protocols for Dynamic Wireless Sensor Networks in Urban Cyber-physical Systems. Journal of Engineering Research and Reports, 26 (7). pp. 424-443. ISSN 2582-2926

Akortia, Vincent K. and Dzivenu, Christopher K. and Kankam, Charles K. and Junior, John K. Quarm (2022) Strength Characteristics of Concrete Partially Replaced with Glass Powder and Palm Kernel Shells. Journal of Engineering Research and Reports, 23 (12). pp. 24-38. ISSN 2582-2926

Al-Nuaimi, Dhamyaa H. and Akbar, Muhammad F. and Salman, Laith B. and Abidin, Intan S. Zainal and Isa, Nor Ashidi Mat (2021) AMC2N: Automatic Modulation Classification Using Feature Clustering-Based Two-Lane Capsule Networks. Electronics, 10 (1). p. 76. ISSN 2079-9292

Algarni, Ali and Elgarhy, Mohammed and M Almarashi, Abdullah and Fayomi, Aisha and R El-Saeed, Ahmed and AHMAD, AFAQ (2021) Classical and Bayesian Estimation of the Inverse Weibull Distribution: Using Progressive Type-I Censoring Scheme. Advances in Civil Engineering, 2021. pp. 1-15. ISSN 1687-8086

Ao, Mingrui and Wang, Miaocao and Zhu, Fulong (2021) Investigation of the Turbulent Drag Reduction Mechanism of a Kind of Microstructure on Riblet Surface. Micromachines, 12 (1). p. 59. ISSN 2072-666X

Ariza-Galván, Enrique and Montealegre-Meléndez, Isabel and Pérez-Soriano, Eva María and Neubauer, Erich and Kitzmantel, Michael and Arévalo, Cristina (2022) Influence of Processing Conditions on the Mechanical Properties of 17-4PH Specimens Produced by Additive Manufacturing. Machines, 10 (11). p. 976. ISSN 2075-1702

Aust, Jonas and Shankland, Sam and Pons, Dirk and Mukundan, Ramakrishnan and Mitrovic, Antonija (2021) Automated Defect Detection and Decision-Support in Gas Turbine Blade Inspection. Aerospace, 8 (2). p. 30. ISSN 2226-4310 (In Press)

Bae, Woorham and Cho, Sung-Yong and Jeong, Deog-Kyoon (2021) A 1.93-pJ/Bit PCI Express Gen4 PHY Transmitter with On-Chip Supply Regulators in 28 nm CMOS. Electronics, 10 (1). p. 68. ISSN 2079-9292

Baghersad, Mostafa and Wilkinson, Suzanne and Khatibi, Hamed and Sousa, Hélder (2021) Comprehensive Indicator Bank for Resilience of Water Supply Systems. Advances in Civil Engineering, 2021. pp. 1-19. ISSN 1687-8086

Bao, Pengxiao and Shi, Liwei and Chen, Zhan and Guo, Shuxiang (2022) A Vision-Based Underwater Formation Control System Design and Implementation on Small Underwater Spherical Robots. Machines, 10 (10). p. 877. ISSN 2075-1702

Bark, Craig and Reilly, Patrick and Weller, Renate and Pfau, Thilo (2024) Inertial Sensor-Based Quantification of Movement Symmetry in Trotting Warmblood Show-Jumping Horses after “Limb-by-Limb” Re-Shoeing of Forelimbs with Rolled Rocker Shoes. Sensors, 24 (15). p. 4848. ISSN 1424-8220

Barrera Sánchez, Agustín and Blanco Ortega, Andrés and Martínez Rayón, Eladio and Gómez Becerra, Fabio Abel and Abúndez Pliego, Arturo and Campos Amezcua, Rafael and Guzmán Valdivia, César Humberto (2022) State of the Art Review of Active and Passive Knee Orthoses. Machines, 10 (10). p. 865. ISSN 2075-1702

Bastos, David and Ribeiro, José and Silva, Fernando and Rodrigues, Mário and Silva, Anabela G. and Queirós, Alexandra and Fernández-Caballero, Antonio and Rocha, Nelson Pacheco and Pereira, António (2020) SmartWalk BAN: Using Body Area Networks to Encourage Older Adults to Perform Physical Activity. Electronics, 10 (1). p. 56. ISSN 2079-9292

Bednarek, Michal and Kicki, Piotr and Bednarek, Jakub and Walas, Krzysztof (2021) Gaining a Sense of Touch Object Stiffness Estimation Using a Soft Gripper and Neural Networks. Electronics, 10 (1). p. 96. ISSN 2079-9292

Benedetti, Diego Muniz and Veras, Carlos Alberto Gurgel (2021) Wind-Tunnel Measurement of Differential Pressure on the Surface of a Dynamically Inflatable Wing Cell. Aerospace, 8 (2). p. 34. ISSN 2226-4310

Bergmann, Dominique and Denzel, Jan and Pfeifle, Ole and Notter, Stefan and Fichter, Walter and Strohmayer, Andreas (2021) In-flight Lift and Drag Estimation of an Unmanned Propeller-Driven Aircraft. Aerospace, 8 (2). p. 43. ISSN 2226-4310

Bharadiya, Jasmin Praful and Thomas, Reji Kurien and Ahmed, Farhan (2023) Rise of Artificial Intelligence in Business and Industry. Journal of Engineering Research and Reports, 25 (3). pp. 85-103. ISSN 2582-2926

Bharadiya, Jasmin Praful and Tzenios, Nikolaos Tzenios and Reddy, Manjunath (2023) Forecasting of Crop Yield using Remote Sensing Data, Agrarian Factors and Machine Learning Approaches. Journal of Engineering Research and Reports, 24 (12). pp. 29-44. ISSN 2582-2926

Bilal, Azat and Perveen, Asma and Talamona, Didier and Jahan, Muhammad Pervej (2021) Understanding Material Removal Mechanism and Effects of Machining Parameters during EDM of Zirconia-Toughened Alumina Ceramic. Micromachines, 12 (1). p. 67. ISSN 2072-666X

Blasi, Luciano and Borrelli, Mauro and D’Amato, Egidio and di Grazia, Luigi Emanuel and Mattei, Massimiliano and Notaro, Immacolata (2021) Modeling and Control of a Modular Iron Bird. Aerospace, 8 (2). p. 39. ISSN 2226-4310

Brandl, Martin and Kellner, Karlheinz (2021) Performance Evaluation of Power-Line Communication Systems for LIN-Bus Based Data Transmission. Electronics, 10 (1). p. 85. ISSN 2079-9292

Carreras, Pilar and González, Itziar and Gallardo, Miguel and Ortiz-Ruiz, Alejandra and Morales, Maria Luz and Encinas, Jessica and Martínez-López, Joaquín (2021) Long-Term Human Hematopoietic Stem Cell Culture in Microdroplets. Micromachines, 12 (1). p. 90. ISSN 2072-666X

Cersoli, Trenton and Cresanto, Alexis and Herberger, Callan and MacDonald, Eric and Cortes, Pedro (2021) 3D Printed Shape Memory Polymers Produced via Direct Pellet Extrusion. Micromachines, 12 (1). p. 87. ISSN 2072-666X

Chang, Liang and Li, Zhiwei and Li, Sheng and Jia, Wenang and Ruan, Jian (2022) Heat Loss Analysis of a 2D Pump’s Transmission. Machines, 10 (10). p. 860. ISSN 2075-1702

Chen, Biao and Zhang, Li and Liu, Tingting and Li, Hongsheng and He, Chao (2022) Lightweight Network with Variable Asymmetric Rebalancing Strategy for Small and Imbalanced Fault Diagnosis. Machines, 10 (10). p. 879. ISSN 2075-1702

Chen, Chih-Cheng and Liu, Zhen and Yang, Guangsong and Wu, Chia-Chun and Ye, Qiubo (2020) An Improved Fault Diagnosis Using 1D-Convolutional Neural Network Model. Electronics, 10 (1). p. 59. ISSN 2079-9292

Chen, Ying-Chen and Lin, Chao-Cheng and Chang, Yao-Feng (2021) Post-Moore Memory Technology: Sneak Path Current (SPC) Phenomena on RRAM Crossbar Array and Solutions. Micromachines, 12 (1). p. 50. ISSN 2072-666X

Chen, Zhou and Lin, Hongxin and Deng, Deyuan and Xu, Wanjie and Lu, Hanwen and Chen, Zepeng and Chang, Wen-Shao (2021) Lateral Parametric Vibration of Footbridge under Pedestrian Excitation considering the Time-Delay Effect. Advances in Civil Engineering, 2021. pp. 1-17. ISSN 1687-8086

Cheng, Qisen and Qin, Yutao and Gianchandani, Yogesh B. (2021) A Bidirectional Knudsen Pump with a 3D-Printed Thermal Management Platform. Micromachines, 12 (1). p. 58. ISSN 2072-666X

Chu, Changyong and Yin, Chengfang and Su, Shaohui and Chen, Chang (2022) Synchronous Integration Method of System and Simulation Models for Mechatronic Systems Based on SysML. Machines, 10 (10). p. 864. ISSN 2075-1702

Clare, James and Kourousis, Kyriakos I. (2021) Analysis of Continuing Airworthiness Occurrences under the Prism of a Learning Framework. Aerospace, 8 (2). p. 41. ISSN 2226-4310

Contò, Chiara and Bianchi, Nicola (2022) A Hybrid-Excitation Synchronous Motor with a Change in Polarity. Machines, 10 (10). p. 869. ISSN 2075-1702

Costa, Rúben and Sousa, Vitor F. C. and Silva, Francisco J. G. and Campilho, Raul and Pinto, Arnaldo G. and Ferreira, Luís P. and Soares, Rui (2022) A Novel Robotic Manipulator Concept for Managing the Winding and Extraction of Yarn Coils. Machines, 10 (10). p. 857. ISSN 2075-1702

Cui, Shunfeng and Chen, Yiyang and Li, Xinlin (2022) A Robust and Efficient UAV Path Planning Approach for Tracking Agile Targets in Complex Environments. Machines, 10 (10). p. 931. ISSN 2075-1702

Dang, Nhat and Wang, Zhao-Ying and Wu, Ti-Yuan and Nguyen, Tra and Lin, Ming-Tzer (2021) Measurement of Effects of Different Substrates on the Mechanical Properties of Submicron Titanium Nickel Shape Memory Alloy Thin Film Using the Bulge Test. Micromachines, 12 (1). p. 85. ISSN 2072-666X

Dang, Zhiheng and Yin, Zuoming and Wang, Desheng and Fu, Mingyu and Yin, Qi and Latour, Massimo (2021) Experimental Study on the Calibration of Microparameters of Dolomite in the Barun Open-Pit Mine on the Basis of the Parallel Bond Model. Advances in Civil Engineering, 2021. pp. 1-11. ISSN 1687-8086

Danylec, Andrew and Shahabadkar, Krutika and Dia, Hussein and Kulkarni, Ambarish (2022) Cognitive Implementation of Metaverse Embedded Learning and Training Framework for Drivers in Rolling Stock. Machines, 10 (10). p. 926. ISSN 2075-1702

Das, Smita and Ngashangva, Lightson and Goswami, Pranab (2021) Carbon Dots: An Emerging Smart Material for Analytical Applications. Micromachines, 12 (1). p. 84. ISSN 2072-666X

Dollorenzo, Matteo and Dodde, Vincenzo and Giannoccaro, Nicola Ivan and Palermo, Davide (2022) Simulation and Post-Processing for Advanced Driver Assistance System (ADAS). Machines, 10 (10). p. 867. ISSN 2075-1702

Doole, Malik and Ellerbroek, Joost and Knoop, Victor L. and Hoekstra, Jacco M. (2021) Constrained Urban Airspace Design for Large-Scale Drone-Based Delivery Traffic. Aerospace, 8 (2). p. 38. ISSN 2226-4310

Duan, Qingjuan and Zhao, Quanli and Wang, Tianle (2022) Consistent Solution Strategy for Static Equilibrium Workspace and Trajectory Planning of Under-Constrained Cable-Driven Parallel and Planar Hybrid Robots. Machines, 10 (10). p. 920. ISSN 2075-1702

Dávila-Vilchis, Juana-Mariel and Ávila-Vilchis, Juan Carlos and Vilchis-González, Adriana Herlinda and Zúñiga-Avilés, Luis Adrián and Jacinto-Villegas, Juan Manuel (2022) Fabric Inflatable Soft Actuators for Soft Wearable Devices: The MOSAR Case. Machines, 10 (10). p. 871. ISSN 2075-1702

Feng, Xiaoyun (2022) Consistent Experience Replay in High-Dimensional Continuous Control with Decayed Hindsights. Machines, 10 (10). p. 856. ISSN 2075-1702

Fernandes, Nuno O. and Thürer, Matthias and Stevenson, Mark and Carmo-Silva, Silvio (2022) Improving Urgency-Based Backlog Sequencing of Jobs: An Assessment by Simulation. Machines, 10 (10). p. 935. ISSN 2075-1702

Foysal, Kamrul H. and Chang, Hyo Jung and Bruess, Francine and Chong, Jo Woon (2021) SmartFit: Smartphone Application for Garment Fit Detection. Electronics, 10 (1). p. 97. ISSN 2079-9292

Friedewald, Diliana (2020) Numerical Simulations on Unsteady Nonlinear Transonic Airfoil Flow. Aerospace, 8 (1). p. 7. ISSN 2226-4310

Fu, Jiancun and Shen, Aiqin and Zhang, Huaizhi and Sun, Tuanwei and Hailu, Yang (2021) Laboratory Investigation of Fiber Bragg Grating Strain Sensors for Semirigid Base Asphalt Pavements. Advances in Civil Engineering, 2021. pp. 1-10. ISSN 1687-8086

Gadea-Gironés, Rafael and Herrero-Bosch, Vicente and Monzó-Ferrer, Jose and Colom-Palero, Ricardo (2021) Implementation of Autoencoders with Systolic Arrays through OpenCL. Electronics, 10 (1). p. 70. ISSN 2079-9292

Gao, Shang and Li, Honggang and Kang, Renke and Zhang, Yu and Dong, Zhigang (2021) Effect of Strain Rate on the Deformation Characteristic of AlN Ceramics under Scratching. Micromachines, 12 (1). p. 77. ISSN 2072-666X

García-Sánchez, Pablo and Ramos, Antonio (2021) Continuous Particle Separation in Microfluidics: Deterministic Lateral Displacement Assisted by Electric Fields. Micromachines, 12 (1). p. 66. ISSN 2072-666X

Ge, Junxiong and Wang, Mengyun and Hong, Haimin and Zhao, Jinyu and Cai, Guowei and Zhang, Xiuyu and Lu, Pukun (2022) Discrete-Time Adaptive Decentralized Control for Interconnected Multi-Machine Power Systems with Input Quantization. Machines, 10 (10). p. 878. ISSN 2075-1702

Geng, Jijun and Xia, Linyuan and Wu, Dongjin (2021) Attitude and Heading Estimation for Indoor Positioning Based on the Adaptive Cubature Kalman Filter. Micromachines, 12 (1). p. 79. ISSN 2072-666X

Geng, Weijuan and Liu, Hao and Yin, Jie and Du, Yongwei and Kumah, Daniel and Yuan, Bingxiang (2021) Evaluation of Compression Behaviors of Marine Clay Reinforced with Waste Shredded Tires. Advances in Civil Engineering, 2021. pp. 1-9. ISSN 1687-8086

Gerasimov, Jacob and Balal, Nezah and Liokumovitch, Egor and Richter, Yair and Gerasimov, Michael and Bamani, Eran and Pinhasi, Gad A. and Pinhasi, Yosef (2020) Scaled Modeling and Measurement for Studying Radio Wave Propagation in Tunnels. Electronics, 10 (1). p. 53. ISSN 2079-9292

Gong, Taobo and Zhao, You and Zhao, Yulong and Wang, Lukang and Yang, Yu and Ren, Wei (2021) Design and Manufacturing of a High-Sensitivity Cutting Force Sensor Based on AlSiCO Ceramic. Micromachines, 12 (1). p. 63. ISSN 2072-666X

Gong, Tianhao and Song, Jianhui and Yu, Yang (2022) Formation and Change of Unmanned Ground Vehicles under Formation Change Influence Factor. Machines, 10 (10). p. 872. ISSN 2075-1702

Gonzalez-Prieto, Angel and González-Prieto, Ignacio and Duran, Mario J. and Aciego, Juan J. (2022) Dynamic Response in Multiphase Electric Drives: Control Performance and Influencing Factors. Machines, 10 (10). p. 866. ISSN 2075-1702

Gunawardane, Kosala and Bandara, Nalin and Subasinghage, Kasun and Kularatna, Nihal (2021) Extending the Input Voltage Range of Solar PV Inverters with Supercapacitor Energy Circulation. Electronics, 10 (1). p. 88. ISSN 2079-9292

Gutiérrez Álvarez, Javier and Bisagni, Chiara (2021) A Study on Thermal Buckling and Mode Jumping of Metallic and Composite Plates. Aerospace, 8 (2). p. 56. ISSN 2226-4310

Han, Gujing and Zhang, Min and Li, Qiang and Liu, Xia and Li, Tao and Zhao, Liu and Liu, Kaipei and Qin, Liang (2022) A Lightweight Aerial Power Line Segmentation Algorithm Based on Attention Mechanism. Machines, 10 (10). p. 881. ISSN 2075-1702

Han, Hongzheng and Ma, Hui and Wang, Haixu and Zhu, Jiazan and Li, Zhanwei and Liu, Zimeng (2022) Dynamic Simulation of Cracked Spiral Bevel Gear Pair Considering Assembly Errors. Machines, 10 (10). p. 929. ISSN 2075-1702

Hasan, Saima and Kouzani, Abbas Z. and Mahmud, M A Parvez (2020) Equivalent Circuit Modeling of a Dual-Gate Graphene FET. Electronics, 10 (1). p. 63. ISSN 2079-9292

Hatzivasilis, George and Fysarakis, Konstantinos and Ioannidis, Sotiris and Hatzakis, Ilias and Vardakis, George and Papadakis, Nikos and Spanoudakis, George (2021) SPD-Safe: Secure Administration of Railway Intelligent Transportation Systems. Electronics, 10 (1). p. 92. ISSN 2079-9292

He, Liwen and Dai, Yingcheng and Xue, Sheng and Zheng, Chunshan and Han, Baiqing and Guo, Xin and Liu, Peng (2021) Study on Gas Control Methods Optimization for Mining Safety. Advances in Civil Engineering, 2021. pp. 1-13. ISSN 1687-8086

Hofmann, Jonas and Knopp, Andreas and Spooner, Chad M. and Minelli, Giovanni and Newman, James (2021) Spectral Correlation for Signal Presence Detection and Frequency Acquisition of Small Satellites. Aerospace, 8 (2). p. 57. ISSN 2226-4310

Honari, Mohammad Mahdi and Ghaffarian, Mohammad Saeid and Mirzavand, Rashid (2021) Miniaturized Antipodal Vivaldi Antenna with Improved Bandwidth Using Exponential Strip Arms. Electronics, 10 (1). p. 83. ISSN 2079-9292

Hou, Landong and Li, Bin and Liu, Weilong and Xu, Yiming and Yang, Shuhui and Rong, Xuewen (2022) Deep Reinforcement Learning for Model Predictive Controller Based on Disturbed Single Rigid Body Model of Biped Robots. Machines, 10 (11). p. 975. ISSN 2075-1702

Hu, Huicong and Liu, Ying and Guo, Xin and Fu, Chuan (2022) A Conceptual Design Specification Based on User Aesthetic Information Analysis and Product Functional Reasoning. Machines, 10 (10). p. 868. ISSN 2075-1702

Hua, Yong and Wang, Shuangyuan and Li, Bingchu and Bai, Guozhen and Zhang, Pengju (2021) Dynamic Modeling and Anti-Disturbing Control of an Electromagnetic MEMS Torsional Micromirror Considering External Vibrations in Vehicular LiDAR. Micromachines, 12 (1). p. 69. ISSN 2072-666X

Huang, Haibin and Li, Peng and Wang, Chuang and Yuan, Bingxiang and Chen, Minjie and Feng, Weimin and Bai, Bing (2021) Research and Analysis on the Influence of Small Clear Distance Drilling and Blasting Method on the Existing Tunnel Structure. Advances in Civil Engineering, 2021. pp. 1-8. ISSN 1687-8086

Huang, Kai and Wu, Jingkang and Jiang, Xiaowen and Xiong, Dongliang and Huang, Kaitian and Yao, Hao and Xu, Wenyuan and Peng, Yonggang and Liu, Zhili (2020) A Period-Aware Routing Method for IEEE 802.1Qbv TSN Networks. Electronics, 10 (1). p. 58. ISSN 2079-9292

Huang, Qingqing and Qian, Chunyan and Li, Chao and Han, Yan and Zhang, Yan and Xie, Haofei (2022) Tool Remaining Useful Life Prediction Method Based on Multi-Sensor Fusion under Variable Working Conditions. Machines, 10 (10). p. 884. ISSN 2075-1702

Huang, Xiaoxi and Yang, Junwei and Gao, Zhiying and Sha, Chenglong and Yang, Hua (2022) Output Power and Wake Flow Characteristics of a Wind Turbine with Swept Blades. Machines, 10 (10). p. 876. ISSN 2075-1702

Huang, Zhe and Xu, Jinyu and Leng, Binglin and Ren, Weibo and Chang, Sen and Wang, Zhihang and Xia, Wei and Hou, Yue (2021) Study on the Effects of Powder-Liquid Ratio and Cement Ratio on Mechanical Properties and Microscopic Characteristics of Polymer-Cement Composite. Advances in Civil Engineering, 2021. pp. 1-17. ISSN 1687-8086

Hwangbo, Seon Ae and Choi, Young Min and Lee, Tae Geol (2021) Influence of Piezoelectric Properties on the Ultrasonic Dispersion of TiO2 Nanoparticles in Aqueous Suspension. Micromachines, 12 (1). p. 52. ISSN 2072-666X

Imen, Dhahri (2022) Study of the Heat Transfer of a Two-Tubular Exchanger with a Hemispherical End Buried. Energy and Power Engineering, 14 (11). pp. 705-718. ISSN 1949-243X

Jablonski, Melanie and Poghossian, Arshak and Severins, Robin and Keusgen, Michael and Wege, Christina and Schöning, Michael (2021) Capacitive Field-Effect Biosensor Studying Adsorption of Tobacco Mosaic Virus Particles. Micromachines, 12 (1). p. 57. ISSN 2072-666X

Jang, Seongik and Yang, Hoeseok (2021) A Real-Time Scheduling Approach to Mitigation of Li-Ion Battery Aging in Low Earth Orbit Satellite Systems. Electronics, 10 (1). p. 86. ISSN 2079-9292

Jia, Lianhui and Jiang, Lijie and Wen, Yongliang (2022) A Two-Stage Method for Weak Feature Extraction of Rolling Bearing Combining Cyclic Wiener Filter with Improved Enhanced Envelope Spectrum. Machines, 10 (10). p. 863. ISSN 2075-1702

Jiang, Qingshan and Zhao, Zhiwen and Xu, Zhilong and Sun, Jie and Chen, Xiuyu and Su, Bosheng and Zhao, Zhenye and Jiang, Wanbiao (2022) Effect of Residual Stresses on Wheel Fatigue Life and Experimental Validation. Machines, 10 (10). p. 924. ISSN 2075-1702

Kao, Shao-Ku (2021) Design and Implementation of Fast Locking All-Digital Duty Cycle Corrector Circuit with Wide Range Input Frequency. Electronics, 10 (1). p. 71. ISSN 2079-9292

Karimpour, Ali and Rahmatalla, Salam and Bolboli Ghadikolaee, Hossein and Chung, Wonseok (2021) Finite Element Model-Based Weight-Over Process Philosophy for Bridge Loading Capacity Evaluation and Rating Factor Estimation. Advances in Civil Engineering, 2021. pp. 1-15. ISSN 1687-8086

Kavala Sen, Deniz and Yildiz, Ahmet and Kopmaz, Osman (2022) Optimal Design of a Five-Bar Planar Manipulator and Its Controller by Using Different Algorithms for Minimum Shaking Forces and Moments for the Largest Trajectory in a Usable Workspace. Machines, 10 (11). p. 971. ISSN 2075-1702

Kim, Bobae and Im, Sungbin and Yoo, Geonwook (2020) Performance Evaluation of CNN-Based End-Point Detection Using In-Situ Plasma Etching Data. Electronics, 10 (1). p. 49. ISSN 2079-9292

Kim, Dongwan and Kwon, Jung-Hyok and Kim, Eui-Jik (2020) TSCH Multiple Slotframe Scheduling for Ensuring Timeliness in TS-SWIPT-Enabled IoT Networks. Electronics, 10 (1). p. 48. ISSN 2079-9292

Kim, Ga-Yeong and Son, Jaejung and Han, Jong-In and Park, Je-Kyun (2021) Inertial Microfluidics-Based Separation of Microalgae Using a Contraction–Expansion Array Microchannel. Micromachines, 12 (1). p. 97. ISSN 2072-666X

Kim, Geonwoo and Lee, Deokwoo (2021) Adaptive View Sampling for Efficient Synthesis of 3D View Using Calibrated Array Cameras. Electronics, 10 (1). p. 82. ISSN 2079-9292

Konane, Daouda and Ouedraogo, Wend Yam Serge Boris and Guingane, Toussaint Tilado and Zongo, Abdoulaye and Koalaga, Zacharie and Zougmoré, François (2022) An Exact Solution of Telegraph Equations for Voltage Monitoring of Electrical Transmission Line. Energy and Power Engineering, 14 (11). pp. 669-679. ISSN 1949-243X

Kontaxi, Georgia and Stergiou, Yorgos G. and Mouza, Aikaterini A. (2021) Experimental Study of Bubble Formation from a Micro-Tube in Non-Newtonian Fluid. Micromachines, 12 (1). p. 71. ISSN 2072-666X

Kotkas, Lyubov and Zhurkin, Nikita and Donskoy, Anatolij and Zharkovskij, Aleksander (2022) Design and Mathematical Modeling of a Pneumatic Artificial Muscle-Actuated System for Industrial Manipulators. Machines, 10 (10). p. 885. ISSN 2075-1702

Koyenikan, O. O. and Olukunle, O. J. and Olalusi, A. P. (2019) Design Modification of an Indigenous Extruder. Journal of Engineering Research and Reports, 4 (2). pp. 1-11. ISSN 2582-2926

Kwak, Yun-gi and Heo, Dae-ho and Kim, Sun-Pil and Song, Sung-Geun and Park, Sung-Jun and Kang, Feel-soon (2021) Reliability and Economic Efficiency Analysis of 4-Leg Inverter Compared with 3-Leg Inverters. Electronics, 10 (1). p. 87. ISSN 2079-9292

Lee, Donghyeon and Kim, Joonyoung and Jung, Kyomin (2021) Improving Object Detection Quality by Incorporating Global Contexts via Self-Attention. Electronics, 10 (1). p. 90. ISSN 2079-9292

Lee, Eunho and Hwang, Youngbae (2021) Layer-Wise Network Compression Using Gaussian Mixture Model. Electronics, 10 (1). p. 72. ISSN 2079-9292

Lee, Ho-Jung and Lee, Deokwoo (2020) Study of Process-Focused Assessment Using an Algorithm for Facial Expression Recognition Based on a Deep Neural Network Model. Electronics, 10 (1). p. 54. ISSN 2079-9292

Lee, Jongwon and Roh, Kilsun and Lim, Sung-Kyu and Kim, Youngsu (2021) Sidewall Slope Control of InP Via Holes for 3D Integration. Micromachines, 12 (1). p. 89. ISSN 2072-666X

Lei, Jingxiang and Luo, Wenguang and Huang, Dan and Lan, Hongli (2022) Dual Fuzzy Energy Control Study of Automotive Fuel Cell Hybrid Power System with Three Energy Sources. Machines, 10 (10). p. 880. ISSN 2075-1702

Leng, Jiewu and Chen, Ziying and Huang, Zhiqiang and Zhu, Xiaofeng and Su, Hongye and Lin, Zisheng and Zhang, Ding (2022) Secure Blockchain Middleware for Decentralized IIoT towards Industry 5.0: A Review of Architecture, Enablers, Challenges, and Directions. Machines, 10 (10). p. 858. ISSN 2075-1702

Li, Han and Hu, Yanzhu and Wang, Song (2020) Signal Detection Based on Power-Spectrum Sub-Band Energy Ratio. Electronics, 10 (1). p. 64. ISSN 2079-9292

Li, Jie and Huang, Feng and Tu, Chunlei and Tian, Mengqian and Wang, Xingsong (2022) Elastic Obstacle-Surmounting Pipeline-Climbing Robot with Composite Wheels. Machines, 10 (10). p. 874. ISSN 2075-1702

Li, Jinglong and Zhang, Bo and Sui, Bin and Wu, Yang (2021) Stability Analysis of Rock Slope with Multilayer Weak Interlayer. Advances in Civil Engineering, 2021. pp. 1-9. ISSN 1687-8086

Li, Peng and Cao, Yaolin and Li, Xuelong and Wang, Fakai and Sun, Zhongguang and Chen, Deyou and Huang, Qinke and Li, Zhen and Liang, Shun (2021) Desorption Characterization of Methane in Coal with Different Moisture Contents and Its Influence on Outburst Prediction. Advances in Civil Engineering, 2021. pp. 1-10. ISSN 1687-8086

Li, Qiang and Chen, Zhixiang and Luo, Shaohui and Ince, Ragip (2021) Reflection Crack Analysis of Asphalt Overlay on Cement Concrete Pavement Based on XFEM. Advances in Civil Engineering, 2021. pp. 1-10. ISSN 1687-8086

Li, Tie and Wang, Dong and Liu, Mei-Hua and Chen, Liang and Liu, Hao and Yin, Dawei (2021) Laboratory Study on Changes in Gas Desorption Properties of Anthracite after Cyclic Loading. Advances in Civil Engineering, 2021. pp. 1-11. ISSN 1687-8086

Lin, Shan and Liu, Liping and Rao, Meiwan and Deng, Shu and Wang, Jiaxin and Zhong, Wenfan and Lun, Li and Mei, Yuan (2021) A Principal Component Analysis Control Chart Method for Catenary Status Evaluation and Diagnosis. Advances in Civil Engineering, 2021. pp. 1-10. ISSN 1687-8086

Liu, Chaoran and Hu, Sanshan and Yin, Lu and Yang, Wenli and Yu, Juan and Xu, Yumin and Li, Lili and Wang, Gaofeng and Wang, Luwen (2021) Micro Direct Methanol Fuel Cell Based on Reduced Graphene Oxide Composite Electrode. Micromachines, 12 (1). p. 72. ISSN 2072-666X

Liu, Hongyao and Wang, Panpan and Wu, Jiali and Yan, Xin and Zhang, Yangan and Zhang, Xia (2021) Analysis of Terahertz Wave on Increasing Radar Cross Section of 3D Conductive Model. Electronics, 10 (1). p. 74. ISSN 2079-9292

Liu, Qian and Chen, Lingkun (2021) Asymmetric Evolutionary Game Analysis of Building Information Modeling (BIM) Technology Diffusion. Advances in Civil Engineering, 2021. pp. 1-11. ISSN 1687-8086

Liu, Shiyuan and Li, Zhipeng and Wu, Tong and Zhang, Wei (2021) Determining Ultrasound Arrival Time by HHT and Kurtosis in Wind Speed Measurement. Electronics, 10 (1). p. 93. ISSN 2079-9292

Liu, Xiaoma and Han, Yang and Li, Peng and Guo, Hongwu and Wu, Wenqi (2020) Target Tracking Enhancement by Three-Dimensional Cooperative Guidance Law Imposing Relative Interception Geometry. Aerospace, 8 (1). p. 6. ISSN 2226-4310

Liu, Zilong and Gong, Kexian and Sun, Peng and Deng, Jicai and Zou, Kunheng and Duan, Linlin (2021) OQPSK Synchronization Parameter Estimation Based on Burst Signal Detection. Electronics, 10 (1). p. 69. ISSN 2079-9292

Liyew, Zelalem and Tadesse, Abilo and Bekele, Nebiyu and Tsegaye, Tewodros and Grandone, Elvira (2021) Evaluation of Anticoagulation Control among Patients Taking Warfarin in University of Gondar Hospital, Northwest Ethiopia. Advances in Hematology, 2021. pp. 1-8. ISSN 1687-9104

Losada, Markos and Cortés, Ainhoa and Irizar, Andoni and Cejudo, Javier and Pérez, Alejandro (2020) A Flexible Fog Computing Design for Low-Power Consumption and Low Latency Applications. Electronics, 10 (1). p. 57. ISSN 2079-9292

Lu, Xiang and Zhu, Ao and Song, Yaqi and Ma, Guoli and Bai, Xingzhen and Guo, Yinjing (2022) Application of Improved Robust Local Mean Decomposition and Multiple Disturbance Multi-Verse Optimizer-Based MCKD in the Diagnosis of Multiple Rolling Element Bearing Faults. Machines, 10 (10). p. 883. ISSN 2075-1702

Ma, Chao-Tsung and Gu, Zhen-Huang (2021) Review on Driving Circuits for Wide-Bandgap Semiconductor Switching Devices for Mid- to High-Power Applications. Micromachines, 12 (1). p. 65. ISSN 2072-666X

Marzuki, Robby and Purwanto, . (2024) Exploration of Clean Water Provision Endeavors in Residential Facilities for Construction Workers within the National Capital Development Area (IKN), Indonesia. Journal of Engineering Research and Reports, 26 (4). pp. 205-217. ISSN 2582-2926

Medjdoub, Farid (2021) Editorial for the Special Issue on Wide Bandgap Based Devices: Design, Fabrication and Applications. Micromachines, 12 (1). p. 83. ISSN 2072-666X

Meng, Fan and Qin, Zhongjian and Li, Yanjun and Chen, Jia (2022) Investigation of Transient Characteristics of a Vertical Axial-Flow Pump with Non-Uniform Suction Flow. Machines, 10 (10). p. 855. ISSN 2075-1702

Mesin, Luca (2021) Biomedical Image Processing and Classification. Electronics, 10 (1). p. 66. ISSN 2079-9292

Metz, Isabel C. and Ellerbroek, Joost and Mühlhausen, Thorsten and Kügler, Dirk and Hoekstra, Jacco M. (2021) Analysis of Risk-Based Operational Bird Strike Prevention. Aerospace, 8 (2). p. 32. ISSN 2226-4310

Miao, Jianjun and Lan, Shundong and Lv, Zhihan (2021) Application of Visual Sensing Image Processing Technology under Digital Twins to the Intelligent Logistics System. Advances in Civil Engineering, 2021. pp. 1-13. ISSN 1687-8086

Misawa, Nobuo and Fujii, Satoshi and Kamiya, Koki and Osaki, Toshihisa and Takeuchi, Shoji (2021) Efficient Lipid Bilayer Formation by Dipping Lipid-Loaded Microperforated Sheet in Aqueous Solution. Micromachines, 12 (1). p. 53. ISSN 2072-666X

Miyata, Ryusuke and Tadaki, Daisuke and Yamaura, Daichi and Araki, Shun and Sato, Madoka and Komiya, Maki and Ma, Teng and Yamamoto, Hideaki and Niwano, Michio and Hirano-Iwata, Ayumi (2021) Parallel Recordings of Transmembrane hERG Channel Currents Based on Solvent-Free Lipid Bilayer Microarray. Micromachines, 12 (1). p. 98. ISSN 2072-666X

Mohammed, Wael M. and Haber, Rodolfo E. and Martinez Lastra, Jose L. (2022) Ontology-Driven Guidelines for Architecting Digital Twins in Factory Automation Applications. Machines, 10 (10). p. 861. ISSN 2075-1702

Mottola, Matteo and Massaro, Matteo (2022) Experimental Estimation of the Camber Reduction Factor of Tyres. Machines, 10 (10). p. 921. ISSN 2075-1702

Mustapha, Sikirat Damilola and Ibitoye, B. A. (2022) Understanding of Traffic Signs by Drivers on Urban Roads – A Case Study of Ilorin, Kwara State. Journal of Engineering Research and Reports, 23 (12). pp. 39-47. ISSN 2582-2926

Nam, Dahyun and Cha, Jae Min and Park, Kiwon (2021) Next-Generation Wearable Biosensors Developed with Flexible Bio-Chips. Micromachines, 12 (1). p. 64. ISSN 2072-666X

Nebrida, Jimmy Adora and Oliveros, Oliver (2022) Technological Challenges of an Engineering Department Amidst Pandemic. Journal of Engineering Research and Reports, 23 (12). pp. 236-251. ISSN 2582-2926

Niola, Vincenzo and Savino, Sergio and Quaremba, Giuseppe and Cosenza, Chiara and Nicolella, Armando and Spirto, Mario (2022) Discriminant Analysis of the Vibrational Behavior of a Gas Micro-Turbine as a Function of Fuel. Machines, 10 (10). p. 925. ISSN 2075-1702

Normal, I Nyoman and Setini, Made (2022) Life cycle of ceramic waste materials from the perspective of revenue and environmental management. Engineering Solid Mechanics, 11 (1). pp. 75-88. ISSN 22918744

Norrefeldt, Victor and Mayer, Florian and Herbig, Britta and Ströhlein, Ria and Wargocki, Pawel and Lei, Fang (2021) Effect of Increased Cabin Recirculation Airflow Fraction on Relative Humidity, CO2 and TVOC. Aerospace, 8 (1). p. 15. ISSN 2226-4310

Olalusi, A. P. and Olaoye, S. A. and Isa, J. and Oyerinde, A. S. and Ayo-Olalusi, C. and Adesuyi, D. O. (2022) Development and Performance Evaluation of a Single Screw Extruder for the Production of Floating Fish Feed. Journal of Engineering Research and Reports, 23 (12). pp. 48-58. ISSN 2582-2926

Ottermann, Rico and Steppeler, Tobias and Dencker, Folke and Wurz, Marc Christopher (2022) Degeneration Effects of Thin-Film Sensors after Critical Load Conditions of Machine Components. Machines, 10 (10). p. 870. ISSN 2075-1702

Ouldhamrane, Hichem and Charpentier, Jean-Frédéric and Khoucha, Farid and Zaoui, Abdelhalim and Achour, Yahia and Benbouzid, Mohamed (2022) Optimal Design of Axial Flux Permanent Magnet Motors for Ship RIM-Driven Thruster. Machines, 10 (10). p. 932. ISSN 2075-1702

O’Reilly, Dillon and Herdrich, Georg and Kavanagh, Darren F. (2021) Electric Propulsion Methods for Small Satellites: A Review. Aerospace, 8 (1). p. 22. ISSN 2226-4310

Panagiotou, Pericles and Dimopoulos, Thomas and Dimitriou, Stylianos and Yakinthos, Kyros (2021) Quasi-3D Aerodynamic Analysis Method for Blended-Wing-Body UAV Configurations. Aerospace, 8 (1). p. 13. ISSN 2226-4310

Park, Chester Sungchung and Park, Sungkyung (2021) Implementation of a Fast Link Rate Adaptation Algorithm for WLAN Systems. Electronics, 10 (1). p. 91. ISSN 2079-9292

Park, Keumsun and Chae, Minah and Cho, Jae Hyuk (2021) Image Pre-Processing Method of Machine Learning for Edge Detection with Image Signal Processor Enhancement. Micromachines, 12 (1). p. 73. ISSN 2072-666X

Pathak, Arnav and Norrefeldt, Victor and Pschirer, Marie (2021) Validation of a Simulation Tool for an Environmentally Friendly Aircraft Cargo Fire Protection System. Aerospace, 8 (2). p. 35. ISSN 2226-4310

Pavlenko, Dmytro and Dvirnyk, Yaroslav and Przysowa, Radoslaw (2020) Advanced Materials and Technologies for Compressor Blades of Small Turbofan Engines. Aerospace, 8 (1). p. 1. ISSN 2226-4310

Perelló-Roig, Rafel and Verd, Jaume and Bota, Sebastià and Segura, Jaume (2021) A Tunable-Gain Transimpedance Amplifier for CMOS-MEMS Resonators Characterization. Micromachines, 12 (1). p. 82. ISSN 2072-666X

Perpignan, André A. V. and Tomasello, Stella Grazia and Rao, Arvind Gangoli (2021) Evolution of Emission Species in an Aero-Engine Turbine Stator. Aerospace, 8 (1). p. 11. ISSN 2226-4310

Ponce-Silva, Mario and Salazar-Pérez, Daniel and Rodríguez-Benítez, Oscar Miguel and Vela-Valdés, Luis Gerardo and Claudio-Sánchez, Abraham and De León-Aldaco, Susana Estefany and Cortés-García, Claudia and Saavedra-Benítez, Yesica Imelda and Lozoya-Ponce, Ricardo Eliu and Aquí-Tapia, Juan Antonio (2020) Flyback Converter for Solid-State Lighting Applications with Partial Energy Processing. Electronics, 10 (1). p. 60. ISSN 2079-9292

Prakosa, Setya Widyawan and Faisal, Muhamad and Adhitya, Yudhi and Leu, Jenq-Shiou and Köppen, Mario and Avian, Cries (2021) Design and Implementation of LoRa Based IoT Scheme for Indonesian Rural Area. Electronics, 10 (1). p. 77. ISSN 2079-9292

Previdi, Anita and Piazzoni, Claudio and Borghi, Francesca and Schulte, Carsten and Lorenzelli, Leandro and Giacomozzi, Flavio and Bucciarelli, Alessio and Malgaroli, Antonio and Lamanna, Jacopo and Moro, Andrea and Racchetti, Gabriella and Podestà, Alessandro and Lenardi, Cristina and Milani, Paolo (2021) Micropatterning of Substrates for the Culture of Cell Networks by Stencil-Assisted Additive Nanofabrication. Micromachines, 12 (1). p. 94. ISSN 2072-666X

Rashid, Mohammad Hasanur and Herokuzzaman, Md and Rahman, Md Masudur (2019) Design and Construction of an Atmospheric Pressure HF Plasma Source. Journal of Engineering Research and Reports, 4 (2). pp. 1-9. ISSN 2582-2926

Ratto, Francesco and Fanni, Tiziana and Raffo, Luigi and Sau, Carlo (2021) Mutual Impact between Clock Gating and High Level Synthesis in Reconfigurable Hardware Accelerators. Electronics, 10 (1). p. 73. ISSN 2079-9292

Reinaldo, Christopher and Phu, Sinh Nguyen and Essomba, Terence and Nurahmi, Latifah (2022) Kinematic Comparisons of Hybrid Mechanisms for Bone Surgery: 3-PRP-3-RPS and 3-RPS-3-PRP. Machines, 10 (11). p. 979. ISSN 2075-1702

Richelli, Anna (2021) Low-Voltage Integrated Circuits Design and Application. Electronics, 10 (1). p. 89. ISSN 2079-9292

Rios-Navarro, Antonio and Gutierrez-Galan, Daniel and Dominguez-Morales, Juan Pedro and Piñero-Fuentes, Enrique and Duran-Lopez, Lourdes and Tapiador-Morales, Ricardo and Dominguez-Morales, Manuel Jesús (2021) Efficient Memory Organization for DNN Hardware Accelerator Implementation on PSoC. Electronics, 10 (1). p. 94. ISSN 2079-9292

Rodriguez, Rennier S. and Gomez, Frederick Ray I. (2019) Pick and Place Process Optimization for Thin Semiconductor Packages. Journal of Engineering Research and Reports, 4 (2). pp. 1-9. ISSN 2582-2926

Rustamov, Fayozbek and Kim, Juhwan and Yu, Jihyeon and Kim, Hyunwook and Yun, Joobeom (2020) BugMiner: Mining the Hard-to-Reach Software Vulnerabilities through the Target-Oriented Hybrid Fuzzer. Electronics, 10 (1). p. 62. ISSN 2079-9292

Sabri, Abderraouf and Asbik, Mohamed (2022) Heat and Mass Transfer by Natural Convection during Transpiration trough a Porous Plate. Energy and Power Engineering, 14 (12). pp. 719-736. ISSN 1949-243X

Saleh, Rafat and Barth, Maximilian and Eberhardt, Wolfgang and Zimmermann, André (2021) Bending Setups for Reliability Investigation of Flexible Electronics. Micromachines, 12 (1). p. 78. ISSN 2072-666X

Salucci, Marco and Polo, Alessandro and Vrba, Jan (2021) Multi-Step Learning-by-Examples Strategy for Real-Time Brain Stroke Microwave Scattering Data Inversion. Electronics, 10 (1). p. 95. ISSN 2079-9292

Sarker, Mahidur R. and Mohamed, Ramizi and Saad, Mohamad Hanif Md and Tahir, Muhammad and Hussain, Aini and Mohamed, Azah (2021) A Hybrid Optimization Approach for the Enhancement of Efficiency of a Piezoelectric Energy Harvesting System. Electronics, 10 (1). p. 75. ISSN 2079-9292

Seth, Arjit and Liem, Rhea P. (2020) Amphibious Aircraft Developments: Computational Studies of Hydrofoil Design for Improvements in Water-Takeoffs. Aerospace, 8 (1). p. 10. ISSN 2226-4310

Shakhov, Vladimir and Koo, Insoo (2021) An Efficient Clustering Protocol for Cognitive Radio Sensor Networks. Electronics, 10 (1). p. 84. ISSN 2079-9292

Shen, Honglin and Cai, Shuxiang and Wu, Chuanxiang and Yang, Wenguang and Yu, Haibo and Liu, Lianqing (2021) Recent Advances in Three-Dimensional Multicellular Spheroid Culture and Future Development. Micromachines, 12 (1). p. 96. ISSN 2072-666X

Shen, Shaofei and Gao, Mengqi and Zhang, Fangjuan and Niu, Yanbing (2021) Numerical Study of Multivortex Regulation in Curved Microchannels with Ultra-Low-Aspect-Ratio. Micromachines, 12 (1). p. 81. ISSN 2072-666X

Shi, Chenglong and Zhang, Jigang and Zhang, Junbo and Shao, Feng and Zhang, Yicong and Zhang, Menglin and Smarzewski, Piotr (2021) Experimental Study and Numerical Analysis on Impact Resistance of Civil Air Defense Engineering Shear Wall. Advances in Civil Engineering, 2021. pp. 1-20. ISSN 1687-8086

Shi, Muyang and Qiu, Tian and Tang, Biao and Zhang, Guanguang and Yao, Rihui and Xu, Wei and Chen, Junlong and Fu, Xiao and Ning, Honglong and Peng, Junbiao (2021) Temperature-Controlled Crystal Size of Wide Band Gap Nickel Oxide and Its Application in Electrochromism. Micromachines, 12 (1). p. 80. ISSN 2072-666X

Shi, Yingying (2022) Review on the Preparation of Grout from Quartz Sand. Journal of Engineering Research and Reports, 23 (12). pp. 67-73. ISSN 2582-2926

Siah, Chun Fei and Lum, Lucas Yu Xiang and Wang, Jianxiong and Goh, Simon Chun Kiat and Tan, Chong Wei and Hu, Liangxing and Coquet, Philippe and Li, Hong and Tan, Chuan Seng and Tay, Beng Kang (2021) Development of a CMOS-Compatible Carbon Nanotube Array Transfer Method. Micromachines, 12 (1). p. 95. ISSN 2072-666X

Sitompul, Peberlin Parulian and Manik, Timbul and Batubara, Mario and Suhandi, Bambang (2021) Radio Frequency Interference Measurements for a Radio Astronomy Observatory Site in Indonesia. Aerospace, 8 (2). p. 51. ISSN 2226-4310

Son, Jiyoung and Buck, Edgar C. and Riechers, Shawn L. and Yu, Xiao-Ying (2021) Stamping Nanoparticles onto the Electrode for Rapid Electrochemical Analysis in Microfluidics. Micromachines, 12 (1). p. 60. ISSN 2072-666X

Song, Jintao and Zhang, Shengfei and Tong, Fei and Yang, Jie and Zeng, Zhiquan and Yuan, Shuai and Yigit, Cemal Ozer (2021) Outlier Detection Based on Multivariable Panel Data and K-Means Clustering for Dam Deformation Monitoring Data. Advances in Civil Engineering, 2021. pp. 1-11. ISSN 1687-8086

Song, Ki-Young and Behzadfar, Mahtab and Zhang, Wen-Jun (2022) A Dynamic Pole Motion Approach for Control of Nonlinear Hybrid Soft Legs: A Preliminary Study. Machines, 10 (10). p. 875. ISSN 2075-1702

Song, Pengyun and Liu, Yanghui and Liu, Chao (2022) Research on Parameter Design and Control Method for Current Source Inverter–Fed IM Drive Systems. Machines, 10 (10). p. 922. ISSN 2075-1702

Su, Zhe and Feng, Xianying and Li, Hui and Liu, Yandong and Lu, Ziteng (2022) Hydrodynamics Simulations and Analyses of a Fluid Lubricated Screw-Nut Pair. Machines, 10 (11). p. 970. ISSN 2075-1702

Subendran, Satishkumar and Kang, Chun-Wei and Chen, Chia-Yuan (2021) Comprehensive Hydrodynamic Investigation of Zebrafish Tail Beats in a Microfluidic Device with a Shape Memory Alloy. Micromachines, 12 (1). p. 68. ISSN 2072-666X

Sugito, Sugito and Purba, Ronny and Rizkia, Sella Gita and Ardian, Ridho (2023) Measurement and analysis mechanical properties of cross-laminated timber (CLT) product: Case study on typical lampung lamina arrangement. Engineering Solid Mechanics, 12 (2). pp. 127-132. ISSN 22918744

Sun, Jian and Li, Xiangkun and Xu, Yundou and Pu, Tianyue and Yao, Jiantao and Zhao, Yongsheng (2022) Morphing Wing Based on Trigonal Bipyramidal Tensegrity Structure and Parallel Mechanism. Machines, 10 (10). p. 930. ISSN 2075-1702

Sutanto, Richard Evan and Lee, Sukho (2020) Real-Time Adversarial Attack Detection with Deep Image Prior Initialized as a High-Level Representation Based Blurring Network. Electronics, 10 (1). p. 52. ISSN 2079-9292

Tang, Kuok Ho Daniel (2024) Artificial Intelligence in Occupational Health and Safety Risk Management of Construction, Mining, and Oil and Gas Sectors: Advances and Prospects. Journal of Engineering Research and Reports, 26 (6). pp. 241-253. ISSN 2582-2926

Taniyama, Hiroki and Iwase, Eiji (2021) Design of a Kirigami Structure with a Large Uniform Deformation Region. Micromachines, 12 (1). p. 76. ISSN 2072-666X

Tasie, Nicholas N. and Sigalo, Friday B. and Omubo-Pepple, Valentine B. and Israel-Cookey, Chigozie (2022) Design and Implementation of a Photovoltaic Data Acquisition System for Some Meteorological Variables. Energy and Power Engineering, 14 (11). pp. 652-668. ISSN 1949-243X

Tong, Yinjie and Han, Tao (2021) Anchor Loss Reduction of Lamb Wave Resonator by Pillar-Based Phononic Crystal. Micromachines, 12 (1). p. 62. ISSN 2072-666X

Trainelli, Lorenzo and Salucci, Francesco and Riboldi, Carlo E. D. and Rolando, Alberto and Bigoni, Federico (2021) Optimal Sizing and Operation of Airport Infrastructures in Support of Electric-Powered Aviation. Aerospace, 8 (2). p. 40. ISSN 2226-4310

Tseng, Ting-Shiang and Hsiao, Mei-Hui and Chen, Po-An and Lin, Shu-Yen and Chiu, Shih-Wen and Yao, Da-Jeng (2021) Utilization of a Gas-Sensing System to Discriminate Smell and to Monitor Fermentation during the Manufacture of Oolong Tea Leaves. Micromachines, 12 (1). p. 93. ISSN 2072-666X

Tursunovich, Akhmedxodjayev Khamit and Ahmadjanovich, Tadjibayev Muhammad and No’monjanovich, Sharipov Khayrullo and Kayumov, Juramirza Abdiramatovich and Karimovich, Abduraximov Komiljon (2023) Study of Cotton Seeds as a Processing Material. Engineering, 15 (11). pp. 782-791. ISSN 1947-3931

Uchechi, Akomah and Ify L., Nwaogazie and Onyewuchi, Akaranta (2024) Assessing the Potential of Chemically Activated Crustacean Shells for Persistent Organic Pollutants Removal in Contaminated Water. Journal of Engineering Research and Reports, 26 (10). pp. 41-53. ISSN 2582-2926

Ullah, Qazi Zia and Khan, Gul Muhammad and Hassan, Shahzad and Iqbal, Asif and Ullah, Farman and Kwak, Kyung Sup (2021) A Cartesian Genetic Programming Based Parallel Neuroevolutionary Model for Cloud Server’s CPU Usage Prediction. Electronics, 10 (1). p. 67. ISSN 2079-9292

Uzum, Busra and Onen, Ahmet and Hasanien, Hany M. and Muyeen, S. M. (2020) Rooftop Solar PV Penetration Impacts on Distribution Network and Further Growth Factors—A Comprehensive Review. Electronics, 10 (1). p. 55. ISSN 2079-9292

Vicente-Gabriel, Jorge and Gil-González, Ana-Belén and Luis-Reboredo, Ana and Chamoso, Pablo and Corchado, Juan M. (2021) LSTM Networks for Overcoming the Challenges Associated with Photovoltaic Module Maintenance in Smart Cities. Electronics, 10 (1). p. 78. ISSN 2079-9292

Vodička, Staša and Susič, Antonija Poplas and Zelko, Erika (2021) Implementation of a Savvy Mobile ECG Sensor for Heart Rhythm Disorder Screening at the Primary Healthcare Level: An Observational Prospective Study. Micromachines, 12 (1). p. 55. ISSN 2072-666X

Wan, Chang and Yang, Jiawei and Zhou, Ling and Wang, Shuo and Peng, Jie and Tan, Yu (2022) Fertilization Control System Research in Orchard Based on the PSO-BP-PID Control Algorithm. Machines, 10 (11). p. 982. ISSN 2075-1702

Wan, Li and Shen, Jiajia and Zhang, Changan and Lin, Zanquan and Zhang, Hu and Liang, Yu (2021) The Construction Countermeasures of Shallow-Buried Small Spacing Tunnel Undercrossing Cultural Relic Buildings: A Case Study. Advances in Civil Engineering, 2021. pp. 1-10. ISSN 1687-8086

Wang, Chao and Peng, Zhangming and Liu, Rong (2022) Prediction of Aero-Engine Remaining Useful Life Combined with Fault Information. Machines, 10 (10). p. 927. ISSN 2075-1702

Wang, Jiahui and Liu, Jing and Pan, Guang (2022) A Nonlinear Vibration Control of a String Using the Method Based on Its Time-Varying Length. Machines, 10 (11). p. 981. ISSN 2075-1702

Wang, Juncheng and Zhou, Li and Song, Wenzhi and Zhang, Houle and Wu, Yongxin and Xiang, Ping (2021) Investigation on the Effect of Probability Distribution on the Dynamic Response of Liquefiable Soils. Advances in Civil Engineering, 2021. pp. 1-14. ISSN 1687-8086

Wang, Lukang and Zhao, You and Zhao, Yulong and Yang, Yu and Gong, Taobo and Hao, Le and Ren, Wei (2021) Design and Fabrication of Bulk Micromachined 4H-SiC Piezoresistive Pressure Chips Based on Femtosecond Laser Technology. Micromachines, 12 (1). p. 56. ISSN 2072-666X

Wang, Nianying and Han, Ruofeng and Chen, Changnan and Gu, Jiebin and Li, Xinxin (2021) Double-Deck Metal Solenoids 3D Integrated in Silicon Wafer for Kinetic Energy Harvester. Micromachines, 12 (1). p. 74. ISSN 2072-666X

Wang, Wei and Chen, Jie and Diao, Bo and Guan, Xuefei and He, Jingjing and Huang, Min and Kourousis, Kyriakos (2021) Bayesian Fatigue Life Prediction of Corroded Steel Reinforcing Bars. Advances in Civil Engineering, 2021. pp. 1-15. ISSN 1687-8086

Wang, Wen and Han, Fuming and Chen, Zhanfeng and Wang, Ruijin and Wang, Chuanyong and Lu, Keqing and Wang, Jiahui and Ju, Bingfeng (2021) Modeling and Compensation for Asymmetrical and Dynamic Hysteresis of Piezoelectric Actuators Using a Dynamic Delay Prandtl–Ishlinskii Model. Micromachines, 12 (1). p. 92. ISSN 2072-666X

Wang, Yuanxin and Pan, Cunhua and Zhang, Jian and Gao, Ming and Zhang, Haifeng and Zhong, Kai (2022) Multi-Layered Graph Convolutional Network-Based Industrial Fault Diagnosis with Multiple Relation Characterization Capability. Machines, 10 (10). p. 873. ISSN 2075-1702

Warr, Chandler A. and Hinnen, Hunter S. and Avery, Saroya and Cate, Rebecca J. and Nordin, Gregory P. and Pitt, William G. (2021) 3D-Printed Microfluidic Droplet Generator with Hydrophilic and Hydrophobic Polymers. Micromachines, 12 (1). p. 91. ISSN 2072-666X

Weng, Min-Hang and Tsai, Chin-Yi and Chen, De-Li and Chung, Yi-Chun and Yang, Ru-Yuan (2020) A Bandpass Filter Using Half Mode SIW Structure with Step Impedance Resonator. Electronics, 10 (1). p. 51. ISSN 2079-9292

Wibisono, Dany Dwitama and Isvara, Wisnu (2023) Knowledge Management Maturity Level of Steel Fabricator Companies in Indonesia. Journal of Engineering Research and Reports, 25 (12). pp. 24-33. ISSN 2582-2926

Wickramarachchi, Charuni and Samarasinghe, Jayanga T. and Alyousifi, Yousif and Rathnayake, Upaka and Chen, Qian (2021) Projected Moisture Index (MI) for Tropical Sri Lanka. Advances in Civil Engineering, 2021. pp. 1-19. ISSN 1687-8086

Wu, Kai and Lu, Kuo and Li, Qingsong and Zhang, Yongmeng and Zhuo, Ming and Yu, Sheng and Wu, Xuezhong and Xiao, Dingbang (2021) Analysis of Parametric and Subharmonic Excitation in Push-Pull Driven Disk Resonator Gyroscopes. Micromachines, 12 (1). p. 61. ISSN 2072-666X

Wu, Lanting and Sun, Jianping and Tong, Yuqiang and Chen, Qian (2021) Parametric Sensitivity Study of Deep Excavation in Singapore Old Alluvium Formation. Advances in Civil Engineering, 2021. pp. 1-11. ISSN 1687-8086

Wu, Tao and Zhang, Zongmin (2023) Numerical Analysis Study on Seismic Performance of Semi-Rigid Steel Frame Infilled with Prefabricated Composite Wall Panels. Journal of Engineering Research and Reports, 25 (12). pp. 237-245. ISSN 2582-2926

Xie, Shulian and Zhang, Weimin and Xue, Feng and Li, Dongdong and Liu, Yangbokun and Fleischer, Jürgen and Ehrmann, Christopher (2022) Industry 4.0-Oriented Turnkey Project: Rapid Configuration and Intelligent Operation of Manufacturing Systems. Machines, 10 (11). p. 983. ISSN 2075-1702

Xie, Yunfeng and Li, Cong and Jing, Hui and An, Weibiao and Qin, Junji (2022) Integrated Control for Path Tracking and Stability Based on the Model Predictive Control for Four-Wheel Independently Driven Electric Vehicles. Machines, 10 (10). p. 859. ISSN 2075-1702

Xin, Yupeng and Li, Yuanheng and Li, Wenhui and Wang, Gangfeng (2021) Towards Efficient Milling of Multi-Cavity Aeronautical Structural Parts Considering ACO-Based Optimal Tool Feed Position and Path. Micromachines, 12 (1). p. 88. ISSN 2072-666X

Xiong, Guangyu and Helo, Petri and Ekstrom, Steve and Tamir, Tariku Sinshaw (2022) A Case Study in Social Manufacturing: From Social Manufacturing to Social Value Chain. Machines, 10 (11). p. 978. ISSN 2075-1702

Xiong, Jianbin and Yu, Dezheng and Liu, Shuangyin and Shu, Lei and Wang, Xiaochan and Liu, Zhaoke (2021) A Review of Plant Phenotypic Image Recognition Technology Based on Deep Learning. Electronics, 10 (1). p. 81. ISSN 2079-9292

Xu, Mingxin and Liu, Wenwen and Zou, Kun and Wei, Song and Zhang, Xinri and Li, Encheng and Wang, Qi (2021) Design and Clinical Application of an Integrated Microfluidic Device for Circulating Tumor Cells Isolation and Single-Cell Analysis. Micromachines, 12 (1). p. 49. ISSN 2072-666X

Xu, Sai and Lu, Huazhong and Ference, Christopher and Zhang, Qianqian (2021) An Accuracy Improvement Method Based on Multi-Source Information Fusion and Deep Learning for TSSC and Water Content Nondestructive Detection in “Luogang” Orange. Electronics, 10 (1). p. 80. ISSN 2079-9292

Yamashita, Hiroshi and Yin, Feijia and Grewe, Volker and Jöckel, Patrick and Matthes, Sigrun and Kern, Bastian and Dahlmann, Katrin and Frömming, Christine (2021) Analysis of Aircraft Routing Strategies for North Atlantic Flights by Using AirTraf 2.0. Aerospace, 8 (2). p. 33. ISSN 2226-4310

Yang, Na and Wang, Yun (2020) F_Radish: Enhancing Silent Data Corruption Detection for Aerospace-Based Computing. Electronics, 10 (1). p. 61. ISSN 2079-9292

Yang, Qing and Chi, Zhenxiang and Wang, Lianchun (2022) Uncertainty Analysis of Suspension System Caused by Horizontal Misalignment and Its Suppression Method. Machines, 10 (11). p. 977. ISSN 2075-1702

Yang, Wanqian and Yu, Gang (2022) Federated Multi-Model Transfer Learning-Based Fault Diagnosis with Peer-to-Peer Network for Wind Turbine Cluster. Machines, 10 (11). p. 972. ISSN 2075-1702

Yang, Xiangyu and Geng, Wenping and Bi, Kaixi and Mei, Linyu and Li, Yaqing and He, Jian and Mu, Jiliang and Hou, Xiaojuan and Chou, Xiujian (2021) The Wafer-Level Integration of Single-Crystal LiNbO3 on Silicon via Polyimide Material. Micromachines, 12 (1). p. 70. ISSN 2072-666X

Yang, Ya-xun and Chai, Wen-hao and Liu, De-chuang and Zhang, Wei-de and Lu, Jia-cheng and Yang, Zhi-kui and Chen, Lingkun (2021) An Impact-Echo Experimental Approach for Detecting Concrete Structural Faults. Advances in Civil Engineering, 2021. pp. 1-8. ISSN 1687-8086

Yang, Zeying and Cheng, Zhengquan and Wang, Tianmin and Sun, Yinglin and Wang, Chenghe and Qu, Jianbo and Zhang, Da and Li, Qiang and Hu, Jiang (2021) Study on the Optimal Prestress Level of RC Beams Reinforced with SMA Bars. Advances in Civil Engineering, 2021. pp. 1-12. ISSN 1687-8086

Ye, Hongxian and Huang, Xiangkui and Hu, Xiaoping and Yu, Baohua (2022) Research on the Influence of the Assembly Parameters of the Junction Surface of Ultrasonic Acoustic Components on the Acoustic Performance Parameters. Machines, 10 (11). p. 980. ISSN 2075-1702

Yu, Sicong and Zhang, Xufeng and Liu, Xiaoling and Rudd, Chris and Yi, Xiaosu (2020) A Conceptional Approach of Resin-Transfer-Molding to Rosin-Sourced Epoxy Matrix Green Composites. Aerospace, 8 (1). p. 5. ISSN 2226-4310

Yu, Yue and Jiang, Yibo and Tang, Ning and Tong, Zheming and Tong, Shuiguang (2022) Modeling of the Non-Braided Fabric Composite Rubber Hose for Industrial Hose Pump Design. Machines, 10 (10). p. 928. ISSN 2075-1702

Yusuf, Mahmud and Putra, I. Ketut and Wibawa, I. Made Satriya and Gunawan, Anak Agung Ngurah and Sari, Ida Pertiwi (2022) Design and Manufacture of Radiosonde Based on Arduino Pro Mini Using BME280 Sensor. Journal of Engineering Research and Reports, 23 (12). pp. 1-9. ISSN 2582-2926

Zahoor, Furqan and Hussin, Fawnizu Azmadi and Khanday, Farooq Ahmad and Ahmad, Mohamad Radzi and Mohd Nawi, Illani and Ooi, Chia Yee and Rokhani, Fakhrul Zaman (2021) Carbon Nanotube Field Effect Transistor (CNTFET) and Resistive Random Access Memory (RRAM) Based Ternary Combinational Logic Circuits. Electronics, 10 (1). p. 79. ISSN 2079-9292

Zaky, Alaa A. and Sergeant, Peter and Stathatos, Elias and Falaras, Polycarpos and Ibrahim, Mohamed N. (2022) Employing Dye-Sensitized Solar Arrays and Synchronous Reluctance Motors to Improve the Total Cost and Energy Efficiency of Solar Water-Pumping Systems. Machines, 10 (10). p. 882. ISSN 2075-1702

Zhang, Can-Hong and Ji, En-Yue and Wang, Bao-Tian and Castaldo, Paolo (2021) Research on a Critical Hydraulic Gradient of Piping in Noncohesive Soils. Advances in Civil Engineering, 2021. pp. 1-6. ISSN 1687-8086

Zhang, Chaoyang and Zhang, Juchen and Ji, Weixi and Peng, Wei (2022) Data Acquisition Network Configuration and Real-Time Energy Consumption Characteristic Analysis in Intelligent Workshops for Social Manufacturing. Machines, 10 (10). p. 923. ISSN 2075-1702

Zhang, He and Wang, Shang and Wu, Bingying and Zhang, Weiwei and Hang, Chunjin and Tian, Yanhong (2021) Ultrafast Parallel Micro-Gap Resistance Welding of an AuNi9 Microwire and Au Microlayer. Micromachines, 12 (1). p. 51. ISSN 2072-666X

Zhang, Jianqing and Zhang, Ruikun and Zeng, Yihua and Huang, Dongsheng (2021) A Probabilistic Model of the Unidirectional Tensile Strength of Fiber-Reinforced Polymers for Structural Design. Advances in Civil Engineering, 2021. pp. 1-15. ISSN 1687-8086

Zhang, Qi and Zhao, Cheng and Fan, Li and Zhang, Yulin (2022) Taikobot: A Full-Size and Free-Flying Humanoid Robot for Intravehicular Astronaut Assistance and Spacecraft Housekeeping. Machines, 10 (10). p. 933. ISSN 2075-1702

Zhang, Wencui and Zhang, Jian and Yan, Jingru and Zhu, Yaohong and Mei, Yuan (2021) Selection of the Key Segment Position for Trapezoidal Tapered Rings and Calculation of the Range of Jack Stroke Differences with a Predetermined Key Segment Position. Advances in Civil Engineering, 2021. pp. 1-9. ISSN 1687-8086

Zhang, Yi and He, Wei and Zhang, Jiewen and Dong, Hua and Chen, Lingkun (2021) Experimental and Numerical Investigation on Dynamic Properties and Human-Induced Vibrations of an Asymmetric Steel-Plated Stress-Ribbon Footbridge. Advances in Civil Engineering, 2021. pp. 1-21. ISSN 1687-8086

Zhang, Yinhang and Men, Xiuhua and Wang, Shuai and Fu, Xiuli and Chen, Liwen (2022) CFD-DEM Study of Pleated Filter Plugging Process Based on Porous Media Model. Machines, 10 (10). p. 862. ISSN 2075-1702

Zhao, Guochen and Zhu, Jingzhou and Zhu, Xingji and Xu, Longjun and Troncone, Antonello (2021) Effects of the Predominant Pulse on the Inelastic Displacement Ratios of Pulse-Like Ground Motions Based on Wavelet Analysis. Advances in Civil Engineering, 2021. pp. 1-17. ISSN 1687-8086

Zhao, Le (2021) Horseradish Peroxidase Labelled-Sandwich Electrochemical Sensor Based on Ionic Liquid-Gold Nanoparticles for Lactobacillus brevis. Micromachines, 12 (1). p. 75. ISSN 2072-666X

Zhao, Quan and Tong, Ling and Gao, Bo (2020) Spectral Analysis of Stationary Signals Based on Two Simplified Arrangements of Chirp Transform Spectrometer. Electronics, 10 (1). p. 65. ISSN 2079-9292

Zhao, Wenzheng and Wang, Xueqi and Liu, Yinhua (2022) Path Planning for 5-Axis CMM Inspection Considering Path Reuse. Machines, 10 (11). p. 973. ISSN 2075-1702

Zhao, Yuechao and Song, Jiangkai and Xie, Jun and Wang, Fusong and Chen, Meizhu and Wu, Shaopeng and Foong, Loke (2021) Evaluation of the Volume Stability and Resource Benefit of Basic Oxygen Furnace Slag and Its Asphalt Mixture Based on Field Application. Advances in Civil Engineering, 2021. pp. 1-10. ISSN 1687-8086

Zheng, Jianfei and Zhang, Bowei and Ma, Jing and Zhang, Qingchao and Yang, Lihao (2022) A New Model for Remaining Useful Life Prediction Based on NICE and TCN-BiLSTM under Missing Data. Machines, 10 (11). p. 974. ISSN 2075-1702

Zheng, Yan-Li and Song, Ting-Ting and Chai, Jun-Xiong and Yang, Xiao-Ping and Yu, Meng-Meng and Zhu, Yun-Chao and Liu, Yong and Xie, Yi-Yuan (2021) Exploring a New Adaptive Routing Based on the Dijkstra Algorithm in Optical Networks-on-Chip. Micromachines, 12 (1). p. 54. ISSN 2072-666X

Zhou, Chuanlu and Qin, Long and Chen, Ming and Zhang, Jingxiang and Zhang, Qinghua (2021) Coriolis Force Sliding Mode Control Method for the Rotary Motion of the Central Rigid Body-Flexible Cantilever Beam System in TBM. Advances in Civil Engineering, 2021. pp. 1-7. ISSN 1687-8086

Zhou, Xiaochong and Zhang, Lue and Yang, Zhan and Sun, Lining (2021) Modeling and Inverse Compensation of Cross-Coupling Hysteresis in Piezoceramics under Multi-Input. Micromachines, 12 (1). p. 86. ISSN 2072-666X

Zhou, Yue and Wang, Chuang and Yuan, Bingxiang and Chen, Minjie and Lv, Jianbing and Jianjun, Ma (2021) Research on Visual Management Technology of Tunnel Construction Process Based on BIM Technology. Advances in Civil Engineering, 2021. pp. 1-9. ISSN 1687-8086

Book Section

Amireddy, Kiran Kumar and Raj, S. Solomon (2023) Metamaterials for Subwavelength Imaging. In: Techniques and Innovation in Engineering Research Vol. 5. B P International (a part of SCIENCEDOMAIN International), pp. 59-69. ISBN 978-81-19102-05-1

Atuchin, Victor V. and Gorbachev, Anatoly P. and Khrustalev, Vladimir A. and Tarasenko, Natalya V. (2020) Studies on the Reentrant Four-Layer Quasi-Elliptic Bandstop Filter. In: Recent Developments in Engineering Research Vol. 8. B P International, pp. 11-32. ISBN 978-93-90516-04-9

Barsoum, Nader and Stanley, Glenn Isaiah (2021) Implementation of Low Power High Voltage Supply Device. In: New Approaches in Engineering Research Vol. 10. B P International, pp. 53-64. ISBN 978-93-91595-42-5

Borra, Shashidar Reddy and Saritha, K. (2022) Influence of Viscous Dissipation on MHD Non- Newtonian Fluid Past a Stretching Sheet with Suction/Injection. In: Technological Innovation in Engineering Research Vol. 3. B P International, pp. 1-9. ISBN 978-93-5547-692-0

Dewajani, H. and Susanti, T. and Pratiwi, D. (2021) The Influence of Concentration and Acid Type on the Acidification Process for Increasing Glycerol Concentration and Its Use as a Bio Additive. In: Advanced Aspects of Engineering Research Vol. 15. B P International, pp. 8-16. ISBN 978-93-91215-95-8

Emegha, Joseph Onyeka and Olofinjana, Bolutife and Eleruja, Marcus Adebola and Efe, Frank Ochuko and Azi, Samuel Ogochukwu (2020) A Detailed Study on Preparation and Some Physical Properties of CuxZn1-xS Thin Films Deposited by Metal Organic Chemical Vapour Deposition Technique. In: Recent Developments in Engineering Research Vol. 8. B P International, pp. 44-53. ISBN 978-93-90516-04-9

Ennil, Ali S. Bahr and Elfaghi, Abdulhafid M. (2021) Numerical Simulation of Film Cooling Over Flat Plate. In: New Approaches in Engineering Research Vol. 12. B P International, pp. 10-16. ISBN 978-93-91882-06-8

Girish, B. M. and Satish, B. M. and Vitala, H. R. (2022) Study on the Effect of Nitriding on Wear Behavior of Graphite Reinforced Aluminum Alloy Composites. In: Novel Perspectives of Engineering Research Vol. 6. B P International, pp. 23-34. ISBN 978-93-5547-459-9

Guseinov, N. R. and Ilyin, A. M. (2021) Subthreshold Radiation Damage in Few-Layer Graphene Nanostructures Due to Low-Energy Electron Irradiation. In: New Approaches in Engineering Research Vol. 10. B P International, pp. 32-40. ISBN 978-93-91595-42-5

Hayavadana, J. (2021) Degradation of Polyester Partially Oriented Yarns through Alkaline Hydrolysis Process: A Recent Study. In: New Approaches in Engineering Research Vol. 12. B P International, pp. 46-54. ISBN 978-93-91882-06-8

Hayavadana, J. and Samatha, K. (2021) Investigating the Effect of Copper Sulphate on Hydrogen Peroxide Bleaching with Hydrolysis on P/C Fabric Mechanical Properties. In: New Approaches in Engineering Research Vol. 12. B P International, pp. 55-65. ISBN 978-93-91882-06-8

Jagdale, Balaso (2021) Advances in the Security Features of SATA Solid State Drives. In: Advanced Aspects of Engineering Research Vol. 16. B P International, pp. 60-74. ISBN 978-93-91215-97-2

Jagtap, Rutuja Deshmukh and Singh, D. P. and Singh, Ekta and Shinde, Pramod (2024) The Role of Technology to Enhance City Development by Optimizing Strategy Formulation and Implementation. In: Current Approaches in Engineering Research and Technology Vol. 1. B P International, pp. 139-156. ISBN 978-81-972413-0-7

Kaithari, Dinesh Keloth and Krishnan, Pradeep Kumar and Burtamani, Hisham Mohammed Salim Al (2021) Recent Design and Development of Hydraulic Jack Operated Hose Crimping Machine. In: Advanced Aspects of Engineering Research Vol. 16. B P International, pp. 95-113. ISBN 978-93-91215-97-2

Krishnaiah, N. and Nagaraju, R. and Rao, D. Babu and Rao, B. Venkateswara (2022) A New Reactive Framework for Web Using Data Analaysis. In: Novel Perspectives of Engineering Research Vol. 6. B P International, pp. 35-43. ISBN 978-93-5547-459-9

Kumar, R. S. Mohan and Arun, A. P. (2021) A Detailed Study on Design and Fabrication of an Efficient Handling Water Weed Removing Machine. In: Recent Developments in Engineering Research Vol. 11. B P International, pp. 124-130. ISBN 978-93-90768-03-5

Kumar, Sanjay (2021) Emphasizing Location of Collinear Equilibrium Points in the Generalized Photogravitational Elliptic Restricted Three Body Problem. In: Recent Developments in Engineering Research Vol. 11. B P International, pp. 107-123. ISBN 978-93-90768-03-5

Lasisi, Lawal S. and Dongjun, Li and Chris, Chatwin R. (2021) Nigcomsat-1R Satellite-Based Augmentation System(SBAS) Test Bed Trial: A Scientific Explanation. In: Recent Developments in Engineering Research Vol. 11. B P International, pp. 75-85. ISBN 978-93-90768-03-5

Loganina, V. I. and Frolov, M. V. and Skachkov, Yu. P. (2021) Research on Substantiation of Selection of Components at Creation of Thermal Insulating Dry Building Mixture. In: New Approaches in Engineering Research Vol. 10. B P International, pp. 22-31. ISBN 978-93-91595-42-5

Lupu, Diana-Andreea (2021) Current Trends in the Exploitation of Mature Gas Fields to Capitalize the Energy Potential. In: Recent Developments in Engineering Research Vol. 11. B P International, pp. 97-106. ISBN 978-93-90768-03-5

Maharajan, M. S. and Abirami, T. (2020) An Approach to an Energy Efficient Mechanism Using Mutated Bat Algorithm in Wireless Sensor Network. In: Recent Developments in Engineering Research Vol. 8. B P International, pp. 54-65. ISBN Recent Developments in Engineering Research Vol. 8

Manda, Rajasekhar and Kumar, P. Rajesh (2021) Polyphase Sequences with Good Correlation Properties and Merit Factor Based on Cyclic Algorithm Approach. In: Advanced Aspects of Engineering Research Vol. 16. B P International, pp. 114-128. ISBN 978-93-91215-97-2

Mitianiec, Wladyslaw (2021) Assessment of Total Efficiency in Spark Ignition Adiabatic Engines. In: Recent Developments in Engineering Research Vol. 11. B P International, pp. 86-96. ISBN 978-93-90768-03-5

Mukunthan, B. and Rakesh, G. (2021) Using a Content-Based Filtering Approach, Advanced Study on Spam Detection and Spammer Behavior Analysis on Twitter. In: Advanced Aspects of Engineering Research Vol. 16. B P International, pp. 129-138. ISBN 978-93-91215-97-2

Nogueira, Élcio and Rosa, Hiago da Silva (2022) Thermal Performance of Nanofluids in a Flat Finned Tube Compact Heat Exchanger Using Efficiency and Effectiveness Method. In: Novel Perspectives of Engineering Research Vol. 6. B P International, pp. 44-63. ISBN 978-93-5547-459-9

Parikh, Swapnil M. (2022) Appraisal on Live Virtual Machine Migrations and Its Approaches. In: Novel Perspectives of Engineering Research Vol. 6. B P International, pp. 17-22. ISBN 978-93-5547-459-9

Prasad, Ila (2024) Advancements in Application of Corona Charge Deposition Technique in Semiconductor Industry: A Review. In: Current Approaches in Engineering Research and Technology Vol. 1. B P International, pp. 120-138. ISBN 978-81-972413-0-7

Ragul, G. and Reddy, C. Venkataramana (2020) Recent Studies on Design and Thermal Analysis of a Condenser Waste Heat Recovery Vapour Compression Refrigerator with Augmented Accelerated Flow Evaporator. In: Emerging Trends in Engineering Research and Technology Vol. 10. B P International, pp. 8-17. ISBN 978-93-90206-84-1

Ragul, G. and Reddy, C. Venkataramana (2020) A Study on Performance Investigation, Simulation and Testing of Vertical Axis Wind Turbine with Omni- Directional Duct for Tall Building in Urban Location. In: Emerging Trends in Engineering Research and Technology Vol. 10. B P International, pp. 1-7. ISBN 978-93-90206-84-1

Ramdurai, Balagopal (2021) The Use of Artificial Intelligence in Patient Experience in OP: A Review. In: New Approaches in Engineering Research Vol. 10. B P International, pp. 41-52. ISBN 978-93-91595-42-5

Rao, G. Mallikharjuna (2021) Determination of Information Security Using Cryptography and Image Steganography. In: Advanced Aspects of Engineering Research Vol. 16. B P International, pp. 75-94. ISBN 978-93-91215-97-2

Rao, P. Sankara (2022) Performance Analysis of Diffraction Gain (Gd) Due to Presence of single and Multiple Knife-Edge as Compared to Free Space E- Field and Identifying the Position of Obstacle in a Fresnel Zone. In: Novel Perspectives of Engineering Research Vol. 6. B P International, pp. 64-74. ISBN 978-93-5547-459-9

Rasidi I., I. and Rafai, N. H. and Rahim, E. A. and Kamaruddin, S. A. and Ding, H. and Cheng, K. (2021) Investigating the Cutting Mechanics in 2 Dimensional Ultrasonic Vibration Assisted Milling towards Chip Thickness and Chip Formation. In: Advanced Aspects of Engineering Research Vol. 15. B P International, pp. 1-7. ISBN 978-93-91215-95-8

Rivai, Muhammad and Tasripan, . (2020) An Investigation of Fuel Qualification by Using Quartz Sensors. In: Recent Developments in Engineering Research Vol. 8. B P International, pp. 33-43. ISBN 978-93-90516-04-9

Santos, D´ebora Andr´ea de Oliveira and Mello, Luiz Alencar Reis da Silva and Maia, Marco Antonio Grivet Mattoso (2020) Decomposition Techniques in Mathematical Programming Applied to Energy-Aware Traffic Engineering Optimization. In: Emerging Trends in Engineering Research and Technology Vol. 10. B P International, pp. 18-35. ISBN 978-93-90206-84-1

Sari, Ni Ketut and Ernawati, Dira and Purbasari, Intan Yuniar and Rahmat, Basuki (2021) Estimating the Hydrolysis of Glucose from Bamboo with Micro Controller PID Type Arduino UNO and Fuzzy Method. In: New Approaches in Engineering Research Vol. 12. B P International, pp. 35-45. ISBN 978-93-91882-06-8

Situmorang, Zakarias and Husein, Alice Erni (2023) Fuzzy Rule Suram for Controlling Drying Process System. In: Techniques and Innovation in Engineering Research Vol. 5. B P International, pp. 1-34. ISBN 978-81-19102-05-1

Sokalski, Krzysztof Z. and Jankowski, Bartosz and Ślusarek, Barbara (2020) Equivalence Relation and Scaling in Solving Engineering Problems of the Magnetic Materials. In: Emerging Trends in Engineering Research and Technology Vol. 10. B P International, pp. 36-45. ISBN 978-93-90206-84-1

Taufik, Syahril and Sugianto, Agus (2021) Analysing Numerical Modelling Behaviour of Reinforced Concrete Deep Beam with Strut-and-Tie Model. In: New Approaches in Engineering Research Vol. 12. B P International, pp. 17-34. ISBN 978-93-91882-06-8

Tyagi, Shrestha and Singh, Manohar and Singh, Beer Pal (2021) Synthesis of Semiconducting Nanoparticles Using Infrared Radiation Assisted Stokes' Law: A Novel Approach. In: New Approaches in Engineering Research Vol. 10. B P International, pp. 65-72. ISBN 978-93-91595-42-5

Vilpponen, Hannu and Grundström, Mika and Abrahamsson, Pekka (2020) Exploring the Critical Success Factors in Social and Health Care Information Systems Project Procurement. In: Recent Developments in Engineering Research Vol. 8. B P International, pp. 1-10. ISBN 978-93-90516-04-9

Zhao, Zhuo and Li, Bing and Geng, Leqi and Lu, Jiasheng and Wang, Zheng (2023) Machine Vision Assisted Precision Alignment System for Optical Path Calibration in Point Diffraction Interferometer. In: Techniques and Innovation in Engineering Research Vol. 5. B P International, pp. 35-58. ISBN 978-81-19102-05-1

Book

Khudhur, Dhamyaa Saad and Kassim, Muna S. and Mashkour, Mahmoud A. and Habeeb, Laith Jaafer (2021) Heat Transfer for Engineering Students. B P International. ISBN 978-93-5547-051-5